This was posted 1 year 4 months 26 days ago, and might be an out-dated deal.

Related
  • expired

PLA, ABS, PETG 3D Printer Filament from $16.99/kg + Delivery ($0 SYD C&C) @ Siddament

170
PLA, ABS, PETG 3D Printer Filament from $16.99/kg + Delivery ($0 SYD C&C) @ Siddament
Go to Deal
AssociatedSidddd on 21/06/2023 - 16:42 siddament.com.au (414 clicks)
Last edited 21/06/2023 - 16:46 by 1 other user
OZB

Last restock till August 10th so get in while stock lasts!

You will see cost savings if you buy more then 3 rolls, as under 3 the shipping price remains the same.

USE CODE OZB for 20$ off 20 roll orders

3D Printer filament
All items are now instock once again for next business day dispatch.
Lots of new colors and material types added.
CF and GF materials now come on plastic spools, all other filaments come on cardboard spools which are compatible with the Bambu AMS and most other printers/dryboxes

Store is open 24/7 until the 8th July just drop us a message and we will confirm if we are around at anytime even if its 3am.

Prices start at 16.99 for most materials making it a bargain for local pickups and some interstate deliveries!

We have also changed names from P3D to Siddament But the quality and consistency of the filament remains the same!

Electrical & Electronics 3D Printer Filament

Related Stores

Siddament (was P3D)
Siddament (was P3D)

closed Comments

  • morebierplease on 21/06/2023 - 17:13
    +1

    3DPO ABS is currently 16.06 p/kg + Delivery ($99+ free shipping)

    • AssociatedSidddd @ Siddament (was P3D) on 21/06/2023 - 17:38

      Hey! My prices are all year round and not just a one off sale, while 3dpo is cheaper now due to their EOFY. If you want the same consistent pricing then mine is technically more stable

  • jtb on 21/06/2023 - 17:24

    Hi Op, I posted this Q in another of your post, but you might have missed it.

    Do you know what the max volumetric speed setting should be set to (for PLA and PETG)? Also any chance you could share filament profiles for the Bambu machines (think read that you have an X1 in the other post)?

    • AssociatedSidddd @ Siddament (was P3D) on 21/06/2023 - 17:39
      +2

      Hey! for PETG and PLA I run 26mm3 for PLA CF I run 34mm3 on my bambu, Ill be adding profiles to the site shortly

      • jtb on 23/06/2023 - 21:49

        Thank you. Those are amazing speeds. I think you should definitely mention that in your posts.

        I purchased another brand last year and was tossing up between that and yours (the other brand was slightly cheaper). The MVS for the other brand (based on Orca slicer calibrations) was around 13mm3, so I'll be definitely getting yours when I run out.

        Profiles would be a great addition when you release them.

  • paulhaddon on 21/06/2023 - 17:29

    The PLA (matt & metalic) & PETG I've got from Sidd has worked with zero problems on my P1P.
    Excellent value at $16.99 a spool.

    • AssociatedSidddd @ Siddament (was P3D) on 21/06/2023 - 17:39

      Your order will be ready soon! just have to pack the 300 preorders :)

  • ajh on 21/06/2023 - 18:03

    Awesome quality filament and Sidd is a pleasure to deal with.

  • DmytroP on 21/06/2023 - 18:17

    Good quality filament, ordered again.

  • burkey on 21/06/2023 - 18:27

    Have been pleasantly surprised by this filament - printed the Prusa MK4 pieces in the PETG-CF on the Bambu and they came out amazing.
    My only criticism (and it's a small one), is sometimes the vacuum seal on the spools in cardboard can leave them a bit wonky, and they occasionally don't run true in the Bambu AMS. Not really an issue with the filament, but something to be aware of.
    If only you did master spool type/spool-less filament!

  • Switchblade88 on 21/06/2023 - 20:14
    +1

    5 rolls of PETG for $112 delivered makes it $22.40 each. Not bad.

    The Transparency page? Full points for that! Any company that makes itself accountable has immediately made a good impression and even if it's more expensive I'll likely buy my next required batch here.

    • AssociatedSidddd @ Siddament (was P3D) on 21/06/2023 - 23:18
      +1

      Honesty is the best policy!

      I find a lot of my customers use the filament to make costly items and performance parts, if they spend hours printing and refining from a faulty roll and use that part on their project or whatever their doing and that part fails, it sets them back more time if that makes sense, letting people know of any errors could prevent a 10k drone failling out the sky :)

  • timolol on 21/06/2023 - 22:54

    Hi there! I like your bed adhesion powder feature pic..! 😂

    May I confirm if delivery is free for anywhere with order over $99? Thanks!!

    • AssociatedSidddd @ Siddament (was P3D) on 21/06/2023 - 23:07

      Only the finest!

      Unfortunately no free delivery options due to how our pricing is, though if you buy 20 rolls and use OZB and are in the sydney region its basically free shipping and 10$ off

  • dufflover on 27/06/2023 - 13:01

    Is there are list or clear price levels for how postage changes with weight or rolls to metro Melb 3000? Saves having to play with orders and qty's

    • AssociatedSidddd @ Siddament (was P3D) on 27/06/2023 - 18:37

      Unfortunately not as its auto calculated by sendle, But keep your eyes peeled a change is coming today!

  • plague69 on 30/06/2023 - 01:37

    OP, site says Matte black requires drying. How long at what temp recommended?

    • AssociatedSidddd @ Siddament (was P3D) on 30/06/2023 - 02:03
      +1

      3-4 hours at 50c

      • plague69 on 30/06/2023 - 17:03

        Ordered 7 different rolls. Thanks

        *Waits for black PETG and TPU… Aug you reckon?

        • AssociatedSidddd @ Siddament (was P3D) on 01/07/2023 - 14:39
          +1

          Yeah once I return from holidays around 9-10th aug a full restock Is coming with the newer packaging and qol improvements. Not to fear the price will not be changing to accommodate the fancier packaging.

          • plague69 on 04/07/2023 - 16:26

            @Sidddd: Just received the package. Thanks for the lollies! Started the drying process now. Just double checking the silver PLA is fine without drying right?

            • AssociatedSidddd @ Siddament (was P3D) on 04/07/2023 - 17:36

              @plague69: The silver PLA should be great out of the box as its apart of the first batch, though as always I still dry my rolls before printing ( its a habit from the past 3 years)

Login or Join to leave a comment
Login Join