6 X Philips 20W LED Smartbright Batten LED20 Cool White 6500k IP20 240V BN008C $99 Delivered @ Eeet5p eBay

60

Go to Deal

Cashback

Associatedsmile315au @ eBay Australia eeet5p on 23/03/2022 - 08:11 ebay.com.au (605 clicks)

The reliable and efficient LED batten replacement
The SmartBright batten family is the ideal retrofit solution for conventional systems. With a wider base, no visible mounting brackets, multiple knock-outs and through wiring possible, installation is hassle-free and simple.

Surface mount direct to ceiling, no visible brackets

• Multiple knock-out options, large terminal and through wiring possible

• Available in emergency option, AS2293 compliant

• Ideal for indoor car parks, stair wells and industrial application

20W

2100lumens

Length: 600mm

Fixed output (PSU)

Frosted diffuser

Power factor ≥0.9

Beam Angle 100° - 120°

CCT 6500K (Cool White)

CRI >80

Operating Temperature 25˚C (0˚C < ta < 50˚C)/ for Emergency version: 25˚C (0˚C < ta < 40˚C)

Lifetime (L70) 50,000 hours

IP/ IK rating IP20/ IK03

Electrical Class Class I

Input Voltage 220V-240V, 50/60Hz

Mounting Type Surface mount, install direct to ceiling, no visible brackets

Surge Protection LED20: Line to Line - 500V, Line to Ground - 1KV

Material Frosted cover: PC Housing: 0.6mm SPCC

Application Warehouses, back of house areas, indoor car parks, factories

Related Stores

eBay Australia

Marketplace

eBay Australia eeet5p

• 

  Sage222 on 23/03/2022 - 09:27

  Bargain! Thanks!

• 

  zombie hunter on 23/03/2022 - 09:51

  How does the power connect ?
  In the middle or end with a special connector
  Very hard to see in th pictures

  • 

    OzHan on 23/03/2022 - 10:22

    +2

    In the middle, Its hard-wired - you will need an electrician to install.

    • 

      zombie hunter on 23/03/2022 - 12:27

      thanks confirmed middle. Yes I do know it hardwired
      Brought 18 for the big shed to replace old fluro

  • 

    [Deactivated] on 23/03/2022 - 12:40

    How does the power connect ?

    "….Multiple knock-out options, large terminal and through wiring possible…" <— this is a product designed to be installed by a licensed electrical tradesperson. The wiring into the battens will be two-core flex at screw terminals. Not DIY friendly for most people.

    • 

      zombie hunter on 23/03/2022 - 13:23

      +1

      My mate sparky will do that just want to make sure the access hole is in the middle for ease of replacement

      • 

        [Deactivated] on 23/03/2022 - 13:27

        WIN!