I have been looking at the S103 kit for about 12 months as a 4x4 tool kit on the longer trips, its metric only which saves having imperial stuff ill never use. Usually $279, on sale for $249, saving $30, but also comes with a S330 kit: https://www.totaltools.com.au/58031-bahco-34-piece-1-4-and-3…
So you end up with a fair bit of good quality tools for not a huge price. Mine was delivered in about 3 days, and its a great piece of kit. Ends Sunday 1st November 2020
S103 kit contains:
12 pcs 1/4" hex sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 mm
6 pcs 1/4" hex deep sockets: 7, 8, 9, 10, 11, 13 mm
1 pcs 1/4" locking extension bar 100 mm/4"
1 pc 1/4" universal joint
1 pc 1/4" spinner with 2-component handle
1 pc 1/4" slim ratchet, 72 teeth/5° action angle, quick release
17 pcs 1/2" hex sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 24, 27, 30, 32, 34 mm
6 pcs 1/2" hex deep sockets 10, 13, 16, 17, 18, 19 mm
2 pcs 1/2" extension bars 125 mm / 5" & 250 mm /10"
1 pc 1/2" breaker bar 250 mm
1 pc 1/2" universal joint
1 pc 1/2" spark plug socket hex 16 mm (5/8")
1 pc 1/2" spark plug socket hex 21 mm (13/16")
1 pc 1/2" slim ratchet, 72 teeth/5° action angle, quick release
1 pc 1/4 forged bit ratchet 48 teeth
1 pc 1/4" x 1/4" bit holder
3 pcs 1/4" bits: PH 1, 2, 3
3 pcs 1/4" bits: PZ 1, 2, 3
6 pcs 1/4" bits: Hex 3, 4, 5, 6, 7, 8 mm
9 pcs 1/4" bits: Torx T6, T8, T9, T10, T15, T20, T25, T30, T40
1 pc 1/2" x 5/16" bit holder
3 pcs 5/16" bits: Torx T45, T50, T55
1 pc adaptor hex 1/4" to square 1/4"
1 pc adaptor hex 1/4" to hex 1/4 bit locking system
13 pcs combination spanners 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19 mm, on a practical removable tool-rack
9 pcs ball point hex key set: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10
1 pc two section plastic box with removable lid
S330 kit contains:
1 each 3/8 in 6-point dynamic drive sockets 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 mm and 22 mm
1 each 3/8 in extension bars 3 in and 6 in
1 x 3/8 in universal joint
1x 3/8 in x in bit holder
1 each 3/8 in spark plug sockets 6-point 16 mm (5/8 in), 21 mm (13/16 in)
1x in spinner handle
1x in x in bit holder
1 each in bits flat 4, 5.5, 7 mm
1 each in bits Phillips # 1, 2, 3
1 each in bits hex 3, 4, 5, 6, 7, 8 mm
1x 3/8 in ratchet handle 54 teeth
ive been wanting to get Bahco S137 but this looks tempting