Getting Ready for nbn - Can I Use My Existing Archer D7?

Hi all,

I have looked through different ISP to select a plan to get ready for nbn (apparently ready in a week), and will probably go with Internode for the 50 plan.
I've FTTC nbn connection type.
I am just not sure if my current modem/router - TP-Link Archer D7 is compatible? I've read elsewhere that it does not support VDSL, but also read that FTTC does not require VDSL?

A little clueless here, just want to find out if I should get a modem when I sign up for nbn plan.

Thanks in advance.

Comments

  • should work. just make sure its in router mode. plug the NCD device into the WAN port of your router.

  • +2

    It will work, just use the router bit. Plug the cable from NCD device(the technician will provide on the day setting up the NBN service) to the WAn port of D7

    If this is the first start up, I suggest you go with ABB for a free month on 100mb as their service will surely better than internode, also you don't need to get stuck for 6 months if anything goes wrong.

    Changing NBN provider is like changing phone provider these days expect you don't need to swap Sim card. It can be done within hours even on weekend.

  • +1

    I have a D9 not compatible with FTTC because its doesn't support VLAN tagging that TPG uses.

    I emailed TPlink and they send put beta firmware that worked

  • +3

    Sure does. I gave my D7 to my brother who's using it on his FTTC connection. Just make sure the firmware is up to date and you've switched it to router only mode…

  • +2

    You don't need any kind of modem for FTTC, only a router. The nbn box does all the modem (VDSL) stuff. Some ISPs do use VLAN tagging like mentioned, which you'll need a supported router for, although not all do.

  • It will work, but you may not get the best transfer speeds.

  • +2

    I've got FTTC with D7. Just upgrade your firmware and it should be fine.

  • Thanks all - appreciate the help!

  • +1

    You are looking in the WRONG PLACE for advise mate. Seriously

    You need to call "Internode" and ask them.
    Its the only way.

    If they say "YES" then you are covered for any problems.

    If you take advice from here then you are taking life into your own hands and potential cost of any rectification.

    Furthermore, if you dont use the modem they provide you wont get any service backup. They will just say YOUR PROBLEM MATE

    In such cases its much better just to use the modem they supply.
    Usually very cheap or FREE on a contract

Login or Join to leave a comment