Hi guys
I've been having a problem with my Sagemcom 4353 from Belong, almost all the times that I turn on my Xbox doesnt connect automatic, so I need to remove the lan cable, wait for 10 seconds or more and after put the cable again, sometimes I need to do it more times, I already tested with another Xbox and the problem persists.
If I connect through wifi I don't have any issue, but I want to use through Lan port because the latency.
Help, please
Thanks.
I already reserved the Xbox address in DHCP, but I cannot find about QOS in this Sagemcom. Do you know where it is?
Also I tried DMZ or port forwarding, with Upnp on, no success.
Now I turned off Upnp and just turned on DMZ with static IP, testing..
Thanks!
Could be that the router is putting some ports to 'sleep' and that it'll only wake up when it's reconnected.
I had an unmanaged switch that did that to me - couldn't figure out for the life of me why devices weren't connecting when they woke up; it was the port sleeping on the switch causing the issues. There was no solution, I simply gave up and swapped switches.
Does the LAN work properly if you fully reboot your Xbox, instead of booting just from standby? If so, that could confirm that the router is putting the ports to sleep (as the Xbox will always do a full reconnect when starting from scratch, waking it up)
I always let the Xbox plugged on the energy, I turned on the xbox this morning and it connect automatically.
This afternoon I did an another test which I removed the power cable from the energy and let outside for 1 hour, after that I plugged it again and turned on the Xbox, at this time didn't connect automatically (but the lights on Lan port were on)
It's really annoying, because I need to change to another Lan port to connect again.
Does anyone have this problem?
Thanks guys!
Check QOS and DHCP Settings