I am looking at buying a Netgear Orbi. I have been looking at my house layout. I am now looking to buy a Orbi RBK20 AC2200 and put the router in the middle of the house and satellite at end (back) of the house. What I am wondering is how far the wifi signal would go from the router (middle of house) to the front of house (where I will not have a satellite)? As always, thanks ozbargainers for any of your advice.
Anyone Have a NetGear Orbi?
Last edited 27/10/2019 - 19:37 by 1 other user
Comments
Are you sure measurement right? What I am trying to measure is the distance in the opposite direction from router to to satellite. ie front of house (no satellite) middle of house (router) rear of house Satellite. What I need is approx 4-7m coverage for the signal to go to front of house (only one wall inbetween). Unsure what distance it goes though and if that is too far.
Clear line of sight meaning you can see the router from where you intend to put the satellite, ie a big hall.
Chances are, it is not and the range is significantly less. It depends on how many surfaces the signal has to bounce off/go through before getting to the satellite.
NOT measuring towards satellite. Measuring opposite direction as previously mentioned. Distance away from router where there IS NO SATELLITE.
@kizashi: Same thing. The satellite and/or your device still runs off a similar signal. The wireless backhaul channel on the satellite works a little differently but the concept is the same, the signal degrades over time and obstructions.
Without a layout of your house, the answer can vary significantly.
Website days 2,000 square feet.
is 280sqm. But this does not answer my question.
No one can answer your question, because your question lacks specific details and there's so many variables.
My RBK50 works flawlessly. It’s acknowledged that Orbi’s manage to deliver consistent speeds across the network the same as if you were right next to the router. I highly recommend them. Not cheap but absolutely worth the money
OP is NOT asking about the RBK50, OP IS ASKING about the RBK20.
I know that but I was letting them know about my setup that might also suit them. Chill mate
Ha, whoosh…was trying to emulate the OP… https://www.ozbargain.com.au/comment/7890398/redir
got the rbk23 from goodguys for $350. it wasnt working initially but when i turned off the apple capsule somehow it fixed itself. if youre parked in front of the house and try to connect, it couldnt connect considering its only 10m from front of house.
How is your current situation with your existing wifi router in the middle of the house and mobile phone on porntube at the front of the house?
The Orbi wifi router will perform roughly the same as any other high end non mesh router. The RF power transmitted for consumer devices at 2.4ghz is limited and governed by law.
Adding a third unit will always solve your problem. Wireless mesh is wonderful, I love it.
Yeah I have an orbi, and sell plenty of them at work.
They are fantastic products that delivery arguably the best range of any product on the market. My house is similar in that I have the main router in the middle, with the satellite at the back sending the signal to an upstairs that is at the back of the house. My room is in the front where I game and the signal remains fantastic even with 3 walls between.
Most of the time when they're sold at work (HN) the customer feedback is very positive, and have yet to see a customer come back for poor range issues with them.
Thanks for the info. Can you give an idea on distance on setup for your front room? Also which Orbi model number using. Tried ringing all Netgear phone numbers to ask but all ring out. Thanks again.
Gents.. question about the Orbi. sorry to hijack… I was looking at the RBK23. I have data points around the house and wondering… is it possible to use the ethernet ports around the house to plug into the Router and satellites? Basically using the Ethernet to create the mesh network… rather than the satellites connecting to each other via wireless?
Since you already have the Ethernet ports, deploy the classic star topology client-server WLAN model and save yourself time, money and headache. Classic WLAN beats mesh WLAN in every way.
I’m not quiet sure I follow. Can you please share with me an example?
It’s a big house and the nbn modem will be in the garage at front. FTTP.https://www.dummies.com/programming/networking/cisco/wireles…
Start with the section "Access Point (AP) Layout". Connect each AP to your switch (or router) via Ethernet.
FTTP does not use a modem, so I don't know what "nbn modem" you were referring to. That device is most likely an all-in-one gateway+router+switch+AP.
Someone's actual installation using an Ubiquiti Unifi system. Just to give a real example, and not a recommendation of Unifi or a purchase suggestion.
This was the only way to deploy a multi-AP wireless LAN before mesh networking became popular, so there are many resources to help guide you.
More examples:
Depends entirely on walls. Clear line of sight, probably a good 25-40m.
Probably bounce 6-7 surfaces before signal is inconsistent.