Hi guys. I need your help to buy the right Ruta. I'm planning on ordering TPG ADSL+2 and wonder if I should buy a router separately or not. Can you point me to a very good model and maybe also to a value model that is good in a two story townhouse? Thanks a lot!
TPG ADSL 2+ - Which Router to Buy?
econzune on 09/03/2017 - 16:19
Comments
You get what you pay for, so get an ADSL2+ router that's within your budget. The more expensive ones have stronger signals, so you'll get a better connection throughout your home. That's probably all it'll do. The internet speed is reliant on how far you are from the exchange. You could have a $200 router/modem, but if you're living 6 km or so from the exchange, you're going to get 1 Mbps speeds.
Speaking from experience.
Thanks guys! I am a bit tech savvy and have installed after market routes but was hoping for less than 300 bucks. Then one that they sell is 100 and I wondered if it is terrible value. I would enjoy a strong signal. Basically "the moto G" of routers = good value would be ideal. Anything in the 100-200 space that sticks out? Thanks for the previous tips, will look into nighthawk. We live 750 meters or 1130meters cable length away. Is that terrible so to not waste money on a good router? Many thanks!
Do you watch TPG IPTV at all?
I would recommend a separate router that supports UdpXy so that you can watch IPTV on your TV.
If not, I think an all-in-one unit would be more convenient.
Asus DSL-AC68U Modem/Router
https://www.asus.com/au/Networking/DSLAC68U/Just purchased this and I highly recommend. Future proof with support for ADSL2+, NBN (FTTP and FTTN/VDSL)
Massive discussion here:
https://forums.whirlpool.net.au/forum-replies.cfm?t=2499850&…Under $300 if you shop around - even less on eBay Sales.
https://staticice.com.au/cgi-bin/search.cgi?q=DSL-AC68UWill that ASUS one support HFC on the NBN?
I'm on Optus Cable at the moment with the AC68U router only.I assume getting HFC just means that they'll upgrade the copper network outside of my house and all the equipment will be the same.
+1 for this I purchased one two weeks ago myself and the wireless signal has greatly improved. In some areas of the house on 5gHz I would only get a 1-2 bars signal and lots of lost packets but now I get the full signal thanks to benefits of its beam forming technology.
In general it's the Wifi part that distinguishes - and you haven't really talked about it. Something with AC1750 or greater is probably best. Make sure you get something 5Ghz capable, 2.4Ghz is usually full, but 5Ghz is usually empty.
It is fascinating how ADSL2+ can reach only about 20/1 Mbps, but routers recommended here are aiming to deliver 100s of Mbps. Keep in mind that maximum throughput has very strong correlation with price, but not so strong with the signal strength and it penetration qualities.
On the topic: I think it is worth trying standalone adsl modem plus this: https://madeby.google.com/wifi/
Whichever router you choose to use with TPG - make sure it uses a broadcom chipset.
I'm with TPG and I have been using a Billion 7800NL for many years and it has proven to be an extremely reliable performer.
Chipset choice should be dictated by cable length to the exchange, not ISP.
Trendchip provides better sync for good and close lines under 2km
Broadcom provides better stability for those over 2km - sync lower yet much more stable.Thanks. That's good to know.
My post regarding the broadcom chipset was based on what I was told in the past by TPG and also the fact that the modem / router that they supply with their ADSL bundles uses the broadcom chipset.
If you are tech savvy, get the Netgear AC1900-Nighthawk VDSL/ADSL Modem Router $289 @ MSY and price match at any retailer. This will ensure signal strong enough to penetrate through all internal walls.
If you are no too tech savvy or can't be bothered, get the one provided by TPG so they can provide as much technical support possible for any internet related issues.