• expired

Philips Mr16 5.5w 4 Pack $15 Bunnings Warehouse West Footscray VIC

80

philips mr16 4 pack $15 bunnings west footscray lots of stock

hope its useful for people needs few down lights

Related Stores

Bunnings Warehouse
Bunnings Warehouse
Marketplace

closed Comments

  • What's the beam spread of these? 24 or 60 degrees?

    • I think they are 60…

    • +3

      I have a set of these infront of me. so here are the specs

      Beam spread - Wide Beam 60 Degrees
      Light output - 400lm
      Colour temp - 3000K (warm white)
      wattage - 5.5w
      Voltage - 12VAC (low Voltage)

  • None at Tuggeranong, ACT.

    Think these are older stock, the new ones with similar looking package says 6.5w -> 425lm instead of 400lm.

    • These were from Woolworths a few months ago:

      https://imgur.com/a/zOSbw

      Not sure which is the newer type, or which has the more appealing light output (I've only installed the one on the left, and am quite pleased with it). EDIT: Yet another new model pictured here.

  • hope its useful for people needs few down lights

    Just a heads up - there are LAMPS, not downlights.

    Also be mindful that these are probably not the same product as sold in single packs (cardboard boxes) that the other guys above me are posting about.

    Those are Philips MASTER which is the higher quality / performance range. These blister packs seem to be the "no name" which means "Chinese market spec" which means "pretty horrid".

    If they put out 400 lumens then that is less than half what your original 50W halogens put out, however because of the way that the human eye automatically adjusts you may not see any difference. You will certainly notice the distortion in colours, but that's going to happen with most LEDs.

    Still worthwhile for the price, but not really the kind of thing to put into your main living areas where lighting really matters. Also note, NOT dimmable and they may act up if you put them on a dimmer or C-bus (dimmer) even if you set it to 100%.

Login or Join to leave a comment